Prümm Feuchtemesstechnik & Prümm Unternehmensberatung
Ihre Partner in Europa für Feuchtemessungen in gasförmigen Stoffen.
Your partners in Europe for humidity-measurement of gas.
General Eastern Feuchtemesssystem - Aluminium-Oxidtransmitter
The DewPro MMY 30 is a loop-powered dew point transmitter for analyzing moisture content in desiccant air dryers, pipeline natural gas and industrial gases.
The 4-20 mA output measures dew point temperature or ppm in gases at line pressure or atmospheric pressure.
The MMY30 features a planar capacitive aluminium oxide sensor for exceptional corrosion resistance, extended calibration stability, quick response times and an exceptionally low temperature coefficient.
An integral flow cell for filtration and flow regulation makes it ideal for monitoring moisture content in a wide range of process environments.
An optional integrated display with user interface provides full programming and diagnostic capability.
Datenblatt deutsch | Datasheet english
The DewPro MMY 31 is a cost effective loop-powered transmitter designed for "in-line" installation where trace moisture measurement is required.
The MMY31 mounts directly in the gas stream for applications including glove boxes, environmental chambers and test chambers.
The DewPro MMY31 features a planar capacitive aluminium oxide sensor for exceptional corrosion resistance, extended calibration stability, quick response times and an exceptionally low temperature coefficient.
An optional integrated display with user interface provides full programming and diagnostic capability.
The intrinsically safe certified electronics housed in a Type 4X/IP67 enclosure allow the HygroPro to be installed directly in the hazardous location.
Datenblatt deutsch | Datasheet english
The MMY 2650 is a moisture analyzer designed to operate with the General Eastern DY55 planar gold aluminium oxide dew point sensor.
The unit offers an optional input that can be used for pressure compensation, an external temperature probe, or any other sensor this input can be configured to accept 0 to 5 VDC and 4 to 20mA.
The standard product comes with one current output, a system alarm relay, and 3 adjustable relays, all with single-pole double-throw 2.5A contacts, selectable failsafe mode, and adjustable hysteresis.
One or two additional current outputs are available.
The Model MMY2650 is available in both wall mount or panel mount configurations.
When used with the DY55 Dew Point Probe, the system is capable of providing dew point readings in the range of -80°C to +20°C dew point over a temperature range of -20°C to +60°C.
When used with approved Zener Barriers the Model MMY 2650 is approved as intrinsically safe for use in hazardous areas by Cenelec and FM. ATEX approval pending.
Datasheet english
General Eastern Hygro Pro
The HygroPro is a loop-powered, intrinsically safe moisture transmitter for measuring the moisture content in gases and non-aqueous liquids in pipeline natural gas, petrochemical, power generation, pharmaceutical, process, and industrial applications.
The HygroPro features an aluminium oxide moisture sensor, temperature thermistor, and pressure transducer built on a single probe mount to provide real time measurements for the calculation of parameters such as ppmv in gases, pounds per million standard cubic feet in natural gas, ppmw in liquids and percent relative humidity in addition to dew point temperature.
The HygroPro consists of the replaceable transducer element containing the moisture, temperature, and pressure sensors along with a display and six-button keypad for full programming of the display and analog (4-20mA) and digital (RS485) outputs.
The intrinsically safe certified electronics housed in a Type 4X/IP67 enclosure allow the HygroPro to be installed directly in the hazardous location.
All calibration data for the moisture and pressure sensors is stored on the replaceable transducer element eliminating the need for manual data entry when changing the element.
Datasheet english
The MMY245 Moisture Analyzer is a convenient, portable instrument that can quickly spot check the performance of gas dryers for compressed air, breathing air, and pure gas supplies.
The planar capacitive sensor combines accurate dew point measurement with fast response time.
The sensor is stored in a very dry environment within the analyzer between measurements, which speeds response time.
The MMY245 can be configured according to the desired moisture unit of measure, temperature unit of measure, or other operating parameters.
An optional pressure sensor provides real-time correction for concentration units of measure or a pressure constant for use with stable pressure measurements.
Voltage outputs 0-5 V DC are standard in non-hazardous areas.
Datenblatt deutsch | Datasheet english
Absolute humidity measurement
16-character, backlit LCD with front panel keypad
Ambient to ppb moisture range
Single channel
Isolated current or voltage output
12-bit moisture measurement resolution
Data and fault alarm relays
Compatible with M Series moisture probe
Optional computer-enhanced speed of response.
Datenblatt deutsch | Datasheet english
MIS 1 The Moisture Image Series 1 is the multichannel, multifunction top-of-the-line model in the GE moisture series analyzer family.
- Optional pressure and temperature inputs used to calculate various parameters
- Calibrations traceable to National Institute of Standards and Technology (NIST)
- Rack, bench, panel, weatherproof (Type 4X) and explosion-proof (Type 7) confi gurations available
- Computer-enhanced response software for abrupt dry-down applications
- Real time matrix display of six parameters simultaneously
- Measures other parameters via auxiliary inputs
- Displays trace measurements in ppbv
- Built-in data logging
- PCMCIA card slot for additional memory and instrument programm updates
Das Moisture Image Serie 1 ist Top-Modell mit mehreren Kanälen und Multifunktionalität der GE Moisture Serie Analysatorfamilie.
- Optionale Druck- und Temperatureingänge dienen zur Kalkulation verschiedener Parameter
- Kalibrierungen erfolgen rückführbar in einem akkreditierten Kalibrierlabor
- Ausführungen als Labor-, Fronttafel-, 19"-Einschub- oder Wettergeschütztes Gehäuse (Typ 4X) und explosionssicher (Typ 7) erhältlich
- Optionales Trendanalyse-Programm zur schnellen Ermittlung bei abrupten Trocknungsvorgängen
- Echtzeit-Matrixdisplay für bis zu sechs Parametern gleichzeitig
- Misst andere Parameter über Zusatzeingänge
- Zeigt Ultra-Spurenmessungen in ppbv an
- Eingebauter Datenspeicher
- PCMCIA-Kartensteckplatz für Zusatzspeicher und Software-Updates
Datenblatt deutsch | Datasheet english
MIS 3 The Moisture Image Series 3 is a dual-channel version of the Moisture Image® Series 1
- Optional pressure and temperature inputs used to calculate various parameters
- Calibrations traceable to National Institute of Standards and Technology (NIST)
- Rack, bench, panel, weatherproof (Type 4X) and explosion-proof (Type 7) configurations available
- Computer-enhanced response software for abrupt dry-down application (optional)
- Real time display of any two parameters simultaneously
- Measures other parameters via auxiliary inputs
- Battery-powered version available
- Displays trace measurements in ppbv
- Built-in data logging
- PCMCIA card slot for additional memory and instrument program updates
- Modbus capability with external RS485 converter
Das Modell Moisture Monitor Serie 3 ist eine Zweikanal- Ausführung des Top-Modells Moisture Image® Serie 1 der GE Moisture Serie Analysator-familie.
- Druck- und Temperatureingänge zur Berechnung verschiedener Parameter
- Kalibrierungen erfolgen rückführbar in einem akkreditierten Kalibrierlabor
- Ausführungen für Labor-, Fronttafel-, 19"-Einschubsowie wettergeschützte (Schutzklasse 4X) und explosiongeschützte (Schutzklasse 7) Ausführungen sind erhältlich
- Optionales Trendanalyse-Programm zur schnellen Messung bei abrupten Trocknungsvorgängen
- Echtzeitanzeige von zwei Messparametern gleichzeitig
- Misst andere Parameter über optionale Zusatzeingänge
- Akku betriebene Version erhältlich
- Zeigt Ultra-Spurenmessungen in ppbv an
- Eingebauter Datenspeicher
- PCMCIA-Kartensteckplatz für Zusatzspeicher und Software-Updates
Datenblatt deutsch | Datasheet english
Schließen
